Merged i2c-helper in Main

vacum-control/test-prject/CMakeLists.txt

@@ -0,0 +1,57 @@
+# Generated Cmake Pico project file
+
+cmake_minimum_required(VERSION 3.13)
+
+set(CMAKE_C_STANDARD 11)
+set(CMAKE_CXX_STANDARD 17)
+set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
+
+# Initialise pico_sdk from installed location
+# (note this can come from environment, CMake cache etc)
+
+# == DO NOT EDIT THE FOLLOWING LINES for the Raspberry Pi Pico VS Code Extension to work ==
+if(WIN32)
+    set(USERHOME $ENV{USERPROFILE})
+else()
+    set(USERHOME $ENV{HOME})
+endif()
+set(sdkVersion 2.1.0)
+set(toolchainVersion 13_3_Rel1)
+set(picotoolVersion 2.1.0)
+set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
+if (EXISTS ${picoVscode})
+    include(${picoVscode})
+endif()
+# ====================================================================================
+set(PICO_BOARD pico CACHE STRING "Board type")
+
+# Pull in Raspberry Pi Pico SDK (must be before project)
+include(pico_sdk_import.cmake)
+
+project(test-prject C CXX ASM)
+
+# Initialise the Raspberry Pi Pico SDK
+pico_sdk_init()
+
+# Add executable. Default name is the project name, version 0.1
+
+add_executable(test-prject test-prject.c )
+
+pico_set_program_name(test-prject "test-prject")
+pico_set_program_version(test-prject "0.1")
+
+# Modify the below lines to enable/disable output over UART/USB
+pico_enable_stdio_uart(test-prject 1)
+pico_enable_stdio_usb(test-prject 0)
+
+# Add the standard library to the build
+target_link_libraries(test-prject
+        pico_stdlib)
+
+# Add the standard include files to the build
+target_include_directories(test-prject PRIVATE
+  ${CMAKE_CURRENT_LIST_DIR}
+)
+
+pico_add_extra_outputs(test-prject)
+